How long the PVC fire hose can be used?

How long the PVC fire hose can be used?      

It is very common to use PVC fire hose in agricultural irrigation. After using the fire hose for a long time, the hose will be damaged. If you don’t know the hose span life, you didn’t know the hose damaged, it will limit the effective use of irrigation. Then what is the hose span life?

Different factory, different fire hose quality, which also causes different span life. Generally, the agricultural PVC irrigation fire hose is used for 2 to 4 years. Why different span life? Because of different usage methods. For example, hose lay on the ground all year round with wind and UV, hose will damage faster. If after used, clean and roll up the hose and put it in the house, span life will be long.

In addition to the way of using the hose, the span life is inseparable from the quality. The high quality PVC irrigation hose lasts longer. With high-strength polyester filaments and high-quality PVC material, high pressure resistance, low/hot restant, hose span life will be long. High-strength polyester filament yarn is a kind of high-strength material commonly used in the production of automobile seat belts. The water belt using this braided wire has higher compression resistance and better toughness. The anti-aging property of the water belt is more reflected in the pvc gel. The high-quality gel is not only anti-aging but also better for anti-freeze and high temperature resistance. Pay attention to the following two points when choosing a pvc irrigation hose:

1. The fire hose has a smooth and bright skin with no broken wires and loose braided wires;
2. The fire hose gel is soft and smooth, non-toxic and tasteless, and the gel is not dry and degummed.

Baoding Anyou Industry
www.anyouirrigation.com
Email: anyou@ayirrigation.com
WhatsApp/ Wechat: +86 15233301525

Spray Tube Irrigation Introduction

Spray Tube Irrigation Introduction

The spray tube is made of a plastic thin-walled hose made by laserly directly punching out small holes. Spray tube, its biggest feature is strong anti-blocking performance, low requirements on water source, no need filter when using groundwater source; low water pressure, and short irrigation time. Common spray tueb size: DN28, DN32, DN40, recommended laying length is 50m.

The application of spray tube

1. It is suitable for crops such as wheat and corn. It can also be used for seedlings and fruit trees.

2. Applicable crops are relatively short and do not affect the spraying of spray tube.

3. Under the membrane. The spray tube is laid under the plastic film, and the water flow can form the drip irrigation effect under the cover of the plastic film.

4, Can also be used for greenhouse irrigation, irrigation of field crops, low investment, easy to use, good effect, farmers accept and use.

What are the advantages of spray tube

1. Spray tube irrigation can improve the conditions for crop growth and development.

2, Spray tube irrigation each time the amount of irrigation is small, not easy to destroy the structure of the soil, so that the crop root growth has a good soil environment.

3, Water conservation, spray tube irrigation basically does not produce deep leakage and surface runoff, and irrigation is relatively uniform.

4, Spray tube irrigation can increase the air humidity, reduce the temperature, in addition, when the water temperature is lower than the temperature, spray tube irrigation can also warm the water in the air, thereby increasing the ground temperature. Conducive to the growth and development of crops.

5. Attaching a facility fertilizer device to the spray tube system, spraying the fertilizer together with the irrigation water not only saves fertilizer, but also improves fertilizer efficiency and saves labor for labor, thereby saving labor expenditure and improving the effect of medicine.

How to install the spray tube

First, the installation method:

1. Prepare the pipe fittings according to the line spacing, and measure the mainline.

2. Install the mainline with one end connected to the pipe (the pipe is connected to the water source and the water pump), the other end is connected to the fitting, and the spray tube is connected behind the fitting.

3. If there is mud or soil in the hole, untie the end of the spray tube, flush with water or simply wipe it.

4. The spray tube can also cover the film, which has a good effect on maintaining the temperature and water evaporation of the planting crop.

5. End cap: One method is to make a knot at the tail; another method is to cut a small piece of spray tube with a width of about 1-2 cm. The end of the spray tube is rolled three times, and then put the end of spray tube into the small piece of tube. 3 ways to make end stop for spray tube

Notice:

1. The pressure about 1 bar.

2. Mechanical or man-made damage is strictly prohibited during transportation and laying.

3. Fertilizer should be melted in advance to ensure no particulate matter.

4. The crop planting ground should be kept as flat as possible to avoid excessive height difference.

5. The supervisor should not directly connect to the high pressure and the water pump. It is best to use a thick tube to make the transition.

6. When changing the raft, the spray tube or the mainline should be removed and kept in a cool place to prolong the life.

7. The spray tube is laid on the ground with the water outlet facing up.

8. When the water quality is poor, a filter can be installed at the suction port to prevent sand, soil and other debris from entering the sprinkler belt.

Baoding Anyou Industry Co.,Ltd
https://www.anyouirrigation.com
www.ayirrigation.com
Email: anyou@ayirrigation.com
Wechat/ WhatsApp: +86 15233301525

Micro Spray Tube 28mm

Micro Spray Tube 28mm

Micro spray tube is an affordable irrigation equipment for spray irrigation. It is easy to install and maintain. Micro spray tube is flexible hose with pattern of drip holes. These drip holes are made with laser punched technology to ensure uniform flow of water. Micro spray tube is suitable for closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, dragon fruit, tomato, lawn, etc.

1. Product Parameter（Specification）of the micro spray tube

Micro spray tube
Diameter	25mm	28mm	32mm	40mm
Width	N40mm	N45mm	N50mm	N63mm
Spray radius	1.5-2.0m	1.5-2.0m	1.5-2.5m	2-3.5m
Spray width	3.0-4.0m	3.0-4.0m	3.0-5m	4.0-7.0m
Thickness	0.2mm, 0.3mm, 0.4mm
Hole spacing	10cm, 20cm, 30cm, 40cm
Hole quantity	3, 5, 7, 9
Working pressure	0.8-1.5 kg / cm² (0.8-1.5 bar)
Spray height	1.5m - 2m
Laying Length	≤70m
Roll length	100m, 150, 200m
Quantity per acre	800-1000m/acre

2. Product Feature of the micro spray tube

(1) Requires low pressure and save water.

(2) It spray fine drops of water evenly, which helps to improve the germination rate of seeds and the survival rate of seedling.

(3) After fertilizer, spray hose irrigation helps to gradually wet the top dressed fertilizer, and effectively allow the fertilizer to penetrate into the ground and reach plants roots, without washing the fertilizer out.

(4) It helps to maintain the looseness of soil.

(5) It is the most suitable equipment for irrigation of sandy soil and on unleveled landscapes.

(6) Easy to install, save labor costs.

(7) Resistant to UV radiation.

3. Application of the micro spray tube

For closely spaced crops, onion, vegetable crops, groundnut, leafy vegetables, cabbage, plantain, cocoa, dragon fruit, tomato, lawn, etc.

4. FAQ

(1) What’s the main material of micro spray tube?

A: PE

(2) Is the micro spray tube resistant to UV radiation?

A: Yes. High quality plastic body withstands UV radiation

(3) Maximum laying length for the farm?

A: Spray tube can be laid up to 70 meters. Pressure must be ensured to be 0.8-1.5 kg / cm².

(4) How many meters for 1 acre farm?

A: 800-1000m

(5) Can you provide C/O certificate of origin?

A: Yes. C/O, Invoice, Packing list, Original B/L

(6) Are you sprinkler factory or trading?

A: We are factory. Welcome to our company Baoding Anyou Industry Co.,Ltd in Baoding China.


Baoding Anyou Industry Co.,Ltd
https://www.anyouirrigation.com
www.ayirrigation.com
Email: anyou@ayirrigation.com
Wechat/ WhatsApp: +86 15233301525

Anti insect sprinkler for trees irrigation

Anti insect sprinkler

Anti insect sprinkler distributes evenly fine droplets on a medium area. With color coded nozzles for easy identification. Used for irrigation of nurseries, greenhouse and trees with medium/small root zone. Such as jackfruit, butter, citrus, grapefruit, dragon fruit, durian, etc.

1. Product Parameter（Specification）of the micro sprinkler AY-1119

Connection size	6.0, 7.5 female
Material	POM
Pressure	1.5-3.0 bar
Radius	2.1-3.7 m
Flow rate	42.2-213.6 L/H

2. Product Feature of the micro sprinkler AY-1119

(1) Well balanced for water distribution with maximum water-use efficiency

(2) High quality plastic body withstands UV radiation, chemicals, and accidental impact

(3) Insect protected- Needle shuts the nozzle off at the end of the irrigation

(4) With color coded nozzles for easy identification

3. Application of the micro sprinkler AY-1119

(1) Used for irrigation of nurseries, greenhouse and trees with medium/small root zone. Such as jackfruit, butter, citrus, grapefruit, dragon fruit, durian, etc.

(3) For greenhouse irrigation.

(4) For landscape and gardening.

https://www.anyouirrigation.com/
http://www.ayirrigation.com/
WhatsApp/ Wechat: +86 15233301525
Email: anyou@ayirrigation.com

Drip tape with flat emitter

Drip tape with flat emitter

-Drip tube tends to 👉 not exceed 60 meters in length from the point where water enters the tube🧐 . Tubes can be extended so long as the point of entry of the water supply never exceeds 60 meters from entry to pipe termination point. e.g. a 120-meter tube where the water entry point is at the center point.

-This is a special type of tube common in most drip systems. They tend to be laid on the ground surface between plants. Emitters are generally installed to these tubes. Drip tubes tend to be made of thin-walled polyethylene and consequently have a much lower pressure rating than other parts of the system. It is generally recommended that these stay above ground as they can commonly be nibbled on by pesky local rodents! In large commercial setups, these tubes are usually "hard-piped" in these systems and the emitters are installed directly onto the laterals.

Micro spray tube 3/4"

Micro spray tube

Micro spray tube
Diameter: 3/4", 1"; 20mm, 25mm, 28mm, 32mm, 40mm
Thickness: 0.2mm, 0.3mm

Baoding Anyou Industry Co.,Ltd
www.ayirrigation.com
www.anyouirrigation.com

Metal sprinkler with stand

Metal sprinkler with stand

Metal sprinkler with stand
Material: Aluminum
Size: 1"
Radius: 22-28m

Baoding Anyou Industry Co.,Ltd
Web: www.ayirrigation.com; www.anyouirrigation.com
Email: anyou@ayirrigation.com